Photometric determination of palladium with chrome azurol S

Summary Chrome Azurol S permits a simple colorimetric determination of palladium with a sensitivity of 0.4g/cm² (practical) or 0.04g/cm² (Sandell), respectively. Conditions and interferences are described in detail.

---

Zusammenfassung Palladium läßt sich mit Hilfe von Chromazurol S auf einfache Weise kolorimetrisch bestimmen. Die praktische Empfindlichkeit der Methode beträgt 0,4g/cm² bzw. 0,04g/cm² nachSandell. Die Arbeitsbedingungen und die durch Fremdionen verursachten Störungen werden angegeben.

---

Résumé Le chromazurol S permet un dosage colorimétrique simple du palladium, avec une sensibilité de 0,4g/cm² (en pratique) ou 0,04g/cm² (Sandell) respectivement. On décrit en détail les conditions opératoires et les interférences.

     

A novel nitrate-selective electrode based on precipitated nitron nitrate

Summary A nitrate-selective electrode based on precipitated nitron nitrate in an epoxy resin matrix has been prepared. The lower detection limit is 10^–5 M, the optimum pH range is 2.0–8.5, and the response time is 1 min. The electrode is selective in presence of CH₃COO^–, SO₄ ^2–, C₂O₄ ^2–, PO₄ ^3–, NO₂ ^–, Cl^– and Br^–, but I^– interferes. Results for nitrate in soil samples were in agreement with values obtained spectrophotometrically.

---

Eine neue nitrat-spezifische Elektrode auf der Basis gefällten Nitronnitrats

Zusammenfassung Eine nitrat-spezifische Elektrode auf der Basis gefällten Nitronnitrats in einer Epoxyharz-Matrix wurde hergestellt. Die untere Nachweisgrenze ist 10^–5 M, das pH-Optimum liegt zwischen 2,0 und 8,5, die Reaktionszeit beträgt 1 Minute. Die Elektrode ist selektiv in Gegenwart von Acetat, Sulfat, Oxalat, Phosphat, Nitrit, Chlorid und Bromid; aber Jodid stört. Ergebnisse der Nitratbestimmung in Bodenproben stimmen mit spektrophotometrischen Resultaten überein.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

Integral equation theory for two-dimensional polymer melts

The polymer reference interaction site model theory is investigated for two-dimensional polymer melts composed of freely-jointed hard disk chains and tangent-disk rods. Exact results for the intramolecular pair correlation functions are input into the theory, and predictions of the theory for the intermolecular pair correlation functions are tested via comparison with simulation. The theory is not as accurate for this system as it is for three-dimensional polymer melts, and the quantitative predictions are not good except at the highest area fractions. Possible reasons for the deficiency in the theory are discussed.     

Integral equation theory of random copolymer melts: self-consistent treatment of intramolecular and intermolecular correlations

A self-consistent integral equation theory is presented for the conformational properties and spinodal lines of random copolymer melts. The theory combines field-theoretic methods with the polymer reference interaction site model (PRISM) theory. The many-chain problem is replaced by a single chain where the sites interact via a bare plus a self-consistently determined medium-induced potential, and the conformational properties are obtained using a variational method. The theoretical prediction for the spinodal line is qualitatively similar to that of non-self-consistent PRISM theory. The theory predicts macroscopic phase separation for all values of the monomer correlation strength, lambda. The inverse spinodal temperature is a nonmonotonic function of lambda with a maximum at lambda(max). For large values of lambda( approximately 1), the values of spinodal temperatures are almost identical to those of non-self-consistent PRISM theory. For low values of lambda, however, the theory predicts higher values for spinodal temperatures than non-self-consistent PRISM theory. The theory predicts significant changes in the mean-square end-to-end distance as the temperature is decreased.     

A mild conversion of phenylpropropnoid into rare phenylbutanoids: (E)-4-(2,4,5-trimethoxyphenyl)but-1,3-diene and (E)-4-(2,4,5-trimethozypheny)but-1-ene occuring in Zingiber cassumunar

(E)-4-(2',4',5'-trimethoxyphenyl)but-1,3-diene (4) and (E)-4-(2',4',5'-trimethoxyphenyl)but-1-ene (6), bioactive phenylbutanoids of Zingiber cassumunar, were synthesized exclusively with trans geometry. Treatment of methylmagnesium iodide with (E)-2',4',5'-trimethoxycinnamaldehyde (2), an oxidized product of abundantly available toxic (Z)-phenylpropanoid (1) of Acorus calamus, gave (E)-4-(2',4',5'-trimethoxyphenyl)but-3-en-2-ol (3) which upon dehydration with copper sulphate/silica gel under microwave irradiation for 3 min afforded 4 in 58% yield. Further, catalytic hydrogenation of 4 with 10% Pd/C afforded 4-(2',4',5'-trimethoxyphenyl)butane (5) which upon dehydrogenation with DDQ/SiO2 afforded hypolipidemic 6 in 54% yield.     

A new chelating resin containing 2-aminothiophenol: Synthesis characterization and determination of mercury in waste water using <Superscript>203</Superscript>Hg radiotracer

A new stable chelating resin was synthesized by incorporating 2-aminothiophenol into Merrifield polymer through C-N covalent bond and characterized by elemental analysis, IR and thermal study. The sorption capacity of the newly formed resin for Hg²⁺ as a function of pH has been studied using ²⁰³Hg radioisotope. The resin exhibits no affinity to alkali or alkaline earth metal ions and common anions. The separation of mercury(II) in presence of different alkali and alkaline earth metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), common anions (ClO₄ ⁻, SO₄ ²⁻) and other diverse ions (Ag⁺, Cu²⁺, Pb²⁺, Fe³⁺, Ni²⁺ and Zn²⁺) has been checked. In column operation it has been observed that Hg²⁺ content of the waste water can be removed at usual pH of natural water. Mercury was determined by isotope dilution method and the concentration of Hg²⁺ in the waste water spiked with ²⁰³Hg was found to be 0.05 to 0.09 μg/ml.     

Synthesis, structure and properties of delocalized transition metal chelates: Diazoketiminato chelates of Co(III) and Pt(II)

The reactions of HL 1 [where HL is 1N-(2-pyridyl-2-methyl)-2-arylazoaniline and is formulated as ArN = NC₆H₄N(H)(CH₂C₅H₄N); Ar = C₆H₅ (for HL¹) or p-MeC₆H₄ (for HL²) or p-ClC₆H₄ (for HL³)] with K₂PtCl₄ and Co(ClO₄)₃ · 6H₂O afforded the (L)PtCl and [(L)₂Co]ClO₄ complexes, respectively. The HL ligands bind the platinum(II) and cobalt(III) centres in a tridentate (N,N,N) fashion, forming new diazoketiminato chelates upon dissociating the amino proton. The X-ray structures of (L³)PtCl and [(L³)₂Co]ClO₄ were determined. Redox properties of the new complexes have been examined.     

Comparison of low-order multireference many-body perturbation theories

Tests have been made to benchmark and assess the relative accuracies of low-order multireference perturbation theories as compared to coupled cluster (CC) and full configuration interaction (FCI) methods. Test calculations include the ground and some excited states of the Be, H(2), BeH(2), CH(2), and SiH(2) systems. Comparisons with FCI and CC calculations show that in most cases the effective valence shell Hamiltonian (H(v)) method is more accurate than other low-order multireference perturbation theories, although none of the perturbative methods is as accurate as the CC approximations. We also briefly discuss some of the basic differences among the multireference perturbation theories considered in this work.     

On the magnetic anisotropy of CuO

The anisotropy of the magnetic susceptibility of CuO has been measured. In both, the paramagnetic and the antiferromagnetic state the susceptibility can be described to a good approximation by